Eiki LC-W4 Bedienungsanleitung Seite 21

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 25
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 20
LC-W4 Basic Serial Command Functional Specifications
21/25
7.7 Temp. Read Command
COMMAND “CR6” [CR]
Detail
Get the temperature information inside the projector
With some temperature sensors installed in the projector, it is possible to get all
temperatures at once.
Acceptable “%1%2” [CR]
%1
%2
%1 = Sensor 1 temperature
%2 = Sensor 2 temperature
Temperature data is shown as “00.0”.
When the temperature sinks to -, the first character is “-” like
“-05.5” [CR].
When no temperature data returns due to hardware problems,
the first character is “E” like” E00.0” [CR].
With some temperature sensors installed, the projector sends
commands continuously.
Ƒ31.5ƑƑ35.2” [CR]
There is the sensor 1 data, one space, and the sensor 2 data.
Response
Unacceptable “?” [CR]
7.8 Lamp Mode Read Command
COMMAND “CR7” [CR]
Detail
Get Lamp Mode for the multiple-lamp projector
It is possible to get Lamp Mode for the multiple-lamp projector.
When lamp failure occurs, it can get that information too.
Acceptable “%1” [CR]
%1
Ex: ”0F”[CR]
The first digit indicates Lamp Mode.
0 = 2 lamps Mode
1 = 1 lamp Mode (Lamp No.1)
2 = 1 lamp Mode (Lamp No.2)
The second digit indicates if the lamp is ON or OFF.
Data is shown as “0-9” and “A-F” which is regarded as 4 bit data.
Assign each bit for each lamp data.
Ex: 0 = ALL is OFF
1 = No.1 is ON, the other is OFF
2 = No.2 is ON, the other is OFF
3 = ALL is ON
Response
Unacceptable “?” [CR]
7.9 PC Type Read Command
COMMAND “CR9” [CR]
Detail Get the current displayed PC Type
Acceptable “%1” [CR]
%1
“Stand_by” --------------------------------------- Standby
“AV_Mode” ------------------------------------- AV Mode
Current Table such as “UXGA1” ---------- PC Mode
“Mode1~5” ---------------------------------- Mode1~5
“Go_PC_adj.” --------------------------------- Auto
“No_signal” ------------------------------------ No signal
Response
Unacceptable “?” [CR]
Seitenansicht 20
1 2 ... 16 17 18 19 20 21 22 23 24 25

Kommentare zu diesen Handbüchern

Keine Kommentare