Eiki LC-XB23 Bedienungsanleitung PDF herunterladen

NSTALLATION INSTRUCTIONS

SLB-131

HANGER BRACKET

for EIKI LC-SB22, LC-XB23, SANYO PLC-XU70, XU73,

Prior to assembly, unpack carton and verify contents.

For security installation, use security hardware package inside the ALL-POINTS™

Security Kit. Follow the instructions below for attaching the bracket to the projector

using either standard hardware or security hardware.

If you are missing any of the following components, please contact Customer Service at

1-800-582-6480

8802-000204 10/10/05

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected]

(1) SLB-131 Bracket (4) M4 Flatwashers

(4) 10 - 24 Thumb Nuts (3) M4 x 10mm Pan Head Screws

(1) .5” X .194” X .5” Nylon Spacer (1) M4 x 20mm Pan Head Screws

INSTALLATION INSTRUCTIONS

1. Turn projector upside down on a flat surface.

2. Place the SLB-131 bracket onto the bottom of the projector lining up the four holes in the

bracket with the four threaded inserts in the bottom of the projector.

3. Using the three M4 X10mm mounting screws and M4 washers, start them into the

mounting holes by hand

4. Slid the one nylon spacer between the bracket and the projector lining it up the spacer

with the last mounting hole and start the M4 X 20mm mounting screw and M4 washer in

the remaining mounting hole, secure all four fasteners at this time. CAUTION: When

attaching the mount be careful not to over tighten mounting screws.

5. See RPA and/or Smart-Lift™ Instructions.

INSTALLATION INSTRUCTIONS SLB-131 HANGER BRACKET for EIKI LC-SB22, LC-XB23, SANYO PLC-XU70, XU73, Prior to assembly, unpack carton and verify cont

Weitere Dokumente für Projektoren Eiki LC-XB23

Keine Kommentare