Eiki LC-XNP4000 Bedienungshandbuch PDF herunterladen (Seite 16)

Setting Up

Power ON / OFF

Turning On The Power

1.Makesurethatpowercordisrmlyand

correctly connected to the projector.

2. The green Power indicator blinks slowly.

3. Remove the lens cover.

4. Press POWER button on the control panel or

the remote control to turn on the projector.

5. Rotate the zoom ring to adjust the screen size.

6. Rotate the focus ring to adjust the focus.

Turning Off The Power

1. Press the POWER button on the control

panel or the remote control. The "power off"

conrmationmessagewillappear.

2. Press the POWER button again while the

message is shown on the screen.

3. When the projector enters "Standby" mode,

the green Power indicator blinks slowly.

4. The projector cannot be turned on while red

"Lamp indicator" is blinking slowly in cooling

mode.

5. If you don’t use the projector for a long time,

remove power cord.

WARNING



Do not touch around the lamp cover and the

exhaust vents during use or just after use, since it

is too hot.

POWER indicator

AC inlet

Outlet

Focus ring

Zoom ring

WARNING



A strong light is emitted when the projector’s

power is on. Do not look into the lens of the

projector or look inside of the projector through

any of the projector’s openings.

CAUTION



Do not turn off the AC power for 120 seconds

after the lamp is turned on. Doing so could cause

premature lamp failure.

Power off?

Please press

key again to power off.

3.~4.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 72 73

Kommentare zu diesen Handbüchern

Keine Kommentare

Eiki LC-XNP4000 Bedienungshandbuch Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Eiki LC-XNP4000