Eiki LC-X4L Bedienungsanleitung PDF herunterladen (Seite 26)

COMPUTER INPUT

This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA or UXGA (refer

to “COMPATIBLE COMPUTER SPECIFICATION” on page 27). When selecting Computer, this projector automatically

tunes to incoming signal and projects proper image without any special setting. (Some computers need setting manually.)

Note : Projector may display one of following messages.

When projector cannot recognize connected signal as PC

system provided in this projector, Auto PC Adjustment

function operates to adjust projector and message “Auto”

is displayed on SYSTEM Menu icon. (Refer to P28.)

When image is not provided properly, manual adjustment

is required. (Refer to P29 and 30.)

There is no signal input from computer. Make sure

connection of computer and a projector is set correctly.

(Refer to TROUBLESHOOTING on page 46.)

Auto

––––

PC SYSTEM Menu icon

Displays system being

selected.

PC SYSTEM MENU

SELECT COMPUTER SYSTEM MANUALLY

PC SYSTEM Menu icon

Displays system being selected.

Systems on this dialog box can

be selected.

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT buttons to move a red frame pointer to PC

SYSTEM Menu icon.

Press POINT DOWN button to move a red arrow pointer to

system that you want to set, and then press

SELECT button.

PC SYSTEM MENU

Custom Mode (1~5) set in PC

ADJUST Menu. (P29, 30)

This projector automatically selects PC system among those provided

in this projector and PC system can be also selected manually.

D-VGA, D-SVGA, D-XGA, D-SXGA 1, D-SXGA 2, D-SXGA 3 or D-UXGA

When digital computer signal is received on DVI terminal,

above message is displayed on PC SYSTEM Menu icon.

AUTOMATIC MULTI-SCAN SYSTEM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Keine Kommentare

Eiki LC-X4L Bedienungsanleitung Seite 26