Eiki LC-X7 Bedienungsanleitung PDF herunterladen (Seite 22)

LC-X7 Basic Serial Command Functional Specifications

22/24

8 Command with Address Specification

8.1 Overview

- Commands with address are used to control more than one projector remotely through

RS-232C by a single computer.

- The command with address is defined as a single command per line that starts with ”A” and

ends with carriage return (0x0D).

- When a projector receives carriage return (0x0D), it starts decoding.

- The address such as “A001” is prefixed to the Basic Serial Command or Expand Serial

Command already mentioned.

e.g.) Functional Execution Command: “A001C05” [CR]

e.g.) Status Read Command: “A001CR0” [CR]

- Projector has the function to set up its own address in Service mode.

Initial setting is “No. 001”

Available range of the value is “001” to “999”

- It clears the data in the receive buffer under following conditions.

・ When receiving LF (0x0A) or EOF (0x1A).

・ When it takes more than one second to receive a single command.

(Until receiving a carriage return after the reception of the first data.)

- It returns the response within 60ms.

1 2 ... 17 18 19 20 21 22 23 24

Keine Kommentare

Eiki LC-X7 Bedienungsanleitung Seite 22