Eiki LC-X80 Bedienungsanleitung PDF herunterladen (Seite 9)

LC_X80 Basic Serial Command Functional Specifications

9/23

6.4 Operation Requirements

In the following status of projector, Available Functional Execution Commands are limited.

Projector Status Available Functional Execution Commands

Standby Mode C00: POWER ON

Countdown in process

C00: POWER ON → Countdown is terminated

C01: POWER OFF

C02: POWER OFF → Countdown is terminated

C46: ZOOM -

C47: ZOOM +

C4A: FOCUS -

C4B: FOCUS +

C5D: LENS SHIFT UP

C5E: LENS SHIFT DOWN

C5F:LENS SHIFT LEFT

C60:LENS SHIFT RIGHT

Cooling Down in process NONE (No Execution)

Cooling Down due to Abnormal

Temperature

NONE (No Execution)

Abnormal Temperature Status NONE (No Execution)

Abnormal Power Status NONE (No Execution)

Abnormal Filter Status NONE (No Execution)

Power-Save Cooling Down in process

NONE (No Execution)

Power Save Status

C00: POWER ON

C01: POWER OFF

Cooling Down in process after OFF

operation due to Lamp Failure

NONE (No Execution)

Note) in above status, the projector returns [ACK] [CR] even if it receives the other command.

6.5 POWER ON Command

Command

“C00” [CR]

Detail

Power ON

When already Power is ON, no operation is started. When sending this

command during Countdown in process, Countdown is terminated.

Acceptable [ACK] [CR]

Response

Unacceptable

“?” [CR]

6.6 POWER OFF Command (Quick POWER OFF)

Command

“C01” [CR]

Detail

Power OFF (Standby)

This command executes Quick Power OFF operation without displaying “Power

OFF?” message, which is displayed when Power is turned OFF with

ON/STAND-BY button of the projector or remote control.

Acceptable [ACK] [CR]

Response

Unacceptable

“?” [CR]

6.7 POWER OFF Command

Command

“C02” [CR]

Detail

Power OFF (Standby)

This command works the same way as when Power is OFF with ON/STAND-BY

button of the projector and remote control.

(When the command is sent once, “Power OFF?” message is displayed. If this

command is sent again while “Power OFF?” message is displayed, Power OFF

operation is executed.)

When sending this command during Countdown in process, Countdown is

terminated.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

Kommentare zu diesen Handbüchern

Keine Kommentare

Eiki LC-X80 Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Eiki LC-X80